JVC THD60 - Manual (Page 15)

12
Selecting the speaker position
mode
Select the speaker position mode according to your speaker
layout (
6).
1 Turn off the System. ( 11)
2
3 Select the appropriate speaker position mode
according to your speaker layout (
6).
As the speaker position mode is changed, the
following settings are also changed automatically:
– The output level settings of the speakers and
subwoofer (see below) are initialized.
– The surround mode ( 13) is set to “AUTO
SUR.”
Adjusting the output level of the
speakers and subwoofer
1
2 Adjust the output level.
Different output level settings can be stored for the
following two groups of sources:
– TH-D60: DVD, USB, IPod, VIDEO1*
1 , VIDEO2
TH-D50/TH-D5/TH-D4: DVD, USB, IPod, VIDEO
– TH-D60: FM, AM and VIDEO1* 2
TH-D50/TH-D5/TH-D4: FM and AM
TH-D60 only: When the source is “XM,” this
adjustment is not available.
You can also make adjustments from the LEVEL
menu (
24) when the speaker position mode is
“S.SPK R.”
* 1
With “COAX” or “OPT” selected as the audio input setting
(
14)
* 2
With “5.1CH” selected as the audio input setting
( 14)
Sound settings and adjustments
Set the remote
control mode
before operation.
« Hold
S.SPK R
For speaker layout A
• The R indicator lights
on the display.
S.SPK F
For speaker layout B
• The F indicator lights
on the display.
• When the speaker position mode is “S.SPK R”:
• When the speaker position mode is “S.SPK F”:
The items you can adjust differ depending on
the selected speaker position mode (see the
left column).
FRNT L = FRNT R = CENTER = SURR L
=
SURR R = SUBWFR = (back to the
beginning)
CENTER = SURR = SUBWFR = (back to
the beginning)
Sound and monitor settings
TH-D6D5D4[JC]EN.book Page 12 Friday, February 23, 2007 7:47 PM