JVC HR-XVC29UJ - Manual (Page 45)

Masterpage:Right-No-Heading
EN
45
Filename [XVC29U_08DVD.fm]
Page 45 14 June 2004 3:53 pm
VFP function
— Adjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programming,
picture tone or personal preference.
NOTE:
Before you start operation;
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step 1 again.
1 Access the VFP setting menu.
2 Select the VFP mode.
Press w e repeatedly.
● Each time you press w e, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
NOTE:
You cannot adjust the parameters of “NORMAL” and
“CINEMA”.
To adjust picture appearance manually
3 Access USER menu.
4 Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
● Adjust gradually and confirm picture appearance results are as
preferred.
● VFP menu disappears and the following pop-up window
appears on the TV screen.
● The selection menu disappears automatically if you do not
change the selection for 10 seconds.
5 Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
● The current VFP settings appear again.
6 Adjust the other parameters.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
To activate your setting
Press DVD PICTURE, then press w e repeatedly to select
“USER 1” or “USER 2” that you have changed the
parameters.
Press DVD PICTURE during
playback.
● The current setting appears on
the TV screen.
NORMAL : Select this normally.
CINEMA : Suitable for movie.
USER 1 / USER 2 : You can adjust parameters that affect
picture appearance and store settings. Go
to step 3.
Press w e repeatedly to
select “USER 1” or “USER 2”.
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
+3
USER 1
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
+3
GAMMA :
(–3 to +3)
Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
BRIGHTNESS :
(–8 to +8)
Controls screen brightness.
CONTRAST :
(–7 to +7)
Controls screen contrast.
SATURATION :
(–7 to +7)
Controls screen color depth.
TINT :
(–7 to +7)
Controls screen tint.
SHARPNESS :
(–8 to +8)
Controls screen sharpness.
0 GAMMA
0 GAMMA
XVC29U_08DVD.fm Page 45 Monday, June 14, 2004 3:54 PM