JVC XM-EX90 - Manual (Page 9)

9
XM-EX90
1
POWER button
Press to switch the power mode between
ON and STANDBY.
2
Numeric keys
Press to select a desired track number
directly.
Press MD CONTROL
£ before pressing this
button.
To select track No. 5: Press 5.
To select track No. 15: Press +10 then 5.
To select track No. 20: Press +10 then 10.
To select track No. 32: Press +10 three times
then press 2.
3
MD CONTROL buttons
Used to control the MD recorder.
£: Starts playback. Also sets the numeric
keys on the remote control unit to the MD
mode.
7: Stops playback or recording.
4, ¢: Skips to the beginning of a track.
¶: Initiates record-pause mode.
PLAY MODE: Switches the play modes,
which include the program play mode and
random play mode.
REPEAT: Switches the repeat play modes,
which include the all-track repeat mode
and 1-track repeat mode.
DISPLAY: Switches the information shown
on the character display.
TRACK MARKING: Switches the track
assignment during recording between
automatic and manual.
4
MD editing control buttons
EDIT: Switches the editing functions.
TITLE: Assigns a title to a MD or its track.
ENTER: Enters the editing contents in
memory.
SET: Sets the point where a track is divided
or the track to be edited.
£: Starts playback.
CANCEL: Cancels an editing item or
character.
</
4, ¢/>: Selects a track number or
adjust track marking. These keys can be
used during editing.
SMALL LETTER: Switches the case of input
characters.
The characters are uppercase while the
button is not lit, and lowercase when it is
lit in green.
5
Character input keyboard
Used for direct input of characters.
* The buttons without description are for
use in controlling other optional
components (see page 43).
EN03-13.XM-EX90[J]/1 98.6.4, 11:59 AM 9