Preparing the remote controller, Installing the battery – JVC KS-FX845R User Manual

Page 36

Advertising
background image

ENGLISH

36

This unit can be remotely controlled as instructed
here (with an optionally purchased remote
controller)
. We recommend that you use remote
controller RM-RK50 or RM-RK60 with your unit.
(Ex.: When you are using RM-RK50)

Before using the remote controller:
• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no
obstacle in between.

• Do not expose the remote sensor to strong light

(direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of
the remote controller decreases, replace the
battery.

1. Remove the battery holder.

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point
pen or a similar tool.

2) Remove the battery holder.

2. Place the battery.

Slide the battery into the holder with the +
side facing upwards so that the battery is fixed
in the holder.

3. Return the battery holder.

Insert again the battery holder by pushing it
until you hear a clicking sound.

Lithium coin battery
(product number:
CR2025)

Remote sensor

WARNING:

• Store the battery in a place where children

cannot reach.
If a child accidentally swallows the battery,
consult a doctor immediately.

• Do not recharge, short, disassemble, or heat the

battery or dispose of it in a fire.
Doing any of these things may cause the battery
to give off heat, crack, or start a fire.

• Do not leave the battery with other metallic

materials.
Doing this may cause the battery to give off
heat, crack, or start a fire.

• When throwing away or saving the battery, wrap

it in tape and insulate; otherwise, the battery
may start to give off heat, crack, or start a fire.

• Do not poke the battery with tweezers or similar

tools.
Doing this may cause the battery to give off
heat, crack, or start a fire.

CAUTION:

DO NOT leave the remote controller in a place
(such as dashboards) exposed to direct sunlight for
a long time. Otherwise, it may be damaged.

(back side)

PREPARING THE REMOTE CONTROLLER

(back side)

EN36-37_KS-FX845R[EE]f.p65

3/13/03, 12:05 PM

36

Advertising