JVC CA-MXJD5 - Manual (Page 25)

21
Using Surround Mode
To activate Surround Mode
• For DVD/CD source
• For AUX/FM/AM/TAPE-A/TAPE-B
* If Multi-channel surround signal comes in, Multi-channel
Surround Mode will be selected automatically.
To adjust the DSP effect level
When one of the DSP modes is selected...
Presetting Automatic DVD Video Sound
Increase Level
The DVD Video sound is sometimes recorded at a lower
level than for other discs and sources. You can set the
increase level for the currently loaded DVD Video, so you
do not have to adjust the volume every time you change the
source.
As the number increases, sound level also increases.
Changing the Scanning Mode
This System supports progressive scanning.
If you connect a progressive TV through the COMPONENT
jacks, you can enjoy a high quality picture from the built-in
DVD player by selecting “PROGRESSIV.”
• PROGRESSIVE indicator lights on when progressive
mode is selected.
Auto Surround Mode*
AUTO • If Multi-channel surround signal comes
in, Multi-channel Surround Mode will
be selected.
• If Dolby Surround signal comes in,
Dolby Pro Logic II MOVIE mode will
be selected automatically.
• If 2-channel signal comes in, STEREO
mode will be selected.
Dolby Pro Logic II modes*
MOVIE Creates 5.1-channel sound field from 2ch
source.
This mode is suitable for movie source.
MUSIC Creates 5.1-channel sound field from 2ch
source.
This mode is suitable for music source.
DSP modes*
DANCE Increases resonance and bass.
HALL Adds depth and brilliance to the sound.
STADIUM Adds clarity and spreads the sound, as in
an outdoor stadium.
Stereo mode
STEREO Cancels the Surround Mode.
INFO
HALL STADIUM STEREO
DANCE AUTO MOVIE MUSIC
HALL
STADIUM STEREO
DANCE
PROGRESSIV Progressive scanning. For a
progressive TV.
INTERLACE Interlaced scanning. For a
conventional TV.
Remote
ONLY
+ –
(holding then...)
Increases the level
Decreases the level
Remote
ONLY INFO
PROGRESSIV
INTERLACE
MX-JD5[A].book Page 21 Wednesday, June 30, 2004 11:11 AM