Jasco 45245 - Manual (Page 12)

12
Step 5. AC Power
Locate the power cable end connection. Attach the
AC adapter (labeled ‘camera’) to end of cable coming
from the camera. Plug-in AC adapter to nearest AC
outlet. Adapter must be used in a dry location. AC
power extension cables are available from the Call
Center 1-800-654-8483 or visit online at
www. jascoproducts.com
TROUBLE SHOOTING
If you are having trouble operating this product,
please consult the guide below. If you have any
questions or feel the camera system is not
operating correctly, or you simply need additional
information, please visit our web site
www.jascoproducts.com, or contact our Technical
Support Group 1-800-654-8483 (option 4).
No camera picture
1. Check all connectors. Make sure camera(s) and
receiver are powered ON.
2. Ensure camera(s) and receiver are set to correct
channel(s).
3. Make sure camera is within range of receiver.
4. Adjust the antenna for the camera, monitor or both
to obtain best image.