JVC XA-HD500S - Manual (Page 13)

13
3 Follow the instructions on the
screens to install Windows Media
Player 10 and XA-HD500 Updater.
• If Windows Media Player 10 has
been installed, the warning
message appears on the display.
To install only the Instruction
Manual and XA-HD500 Updater
without installing Windows Media
Player 10, Click <No>.
To read the Instruction Manual
After installation is completed, select
<Start> - <Programs> (or <All
Programs>) - <JVC> - <XA-HD500> -
<manual>, the click <manual>.
About transferring music
files to the XA-HD500
NOTES:
• For in-depth information on how to use
Windows Media Player, refer to
“Windows Media Player Help”.
• You cannot use any other versions of
Windows Media Player than Windows
Media Player 10.
• It is strongly recommended to assign
an appropriate genre/album/artist
names to each track in Windows
Media Player. After transferring the
files to the XA-HD500, these names
cannot be assigned or edited. Tag
data for Track/Artist/Album/Genre can
be transfer up to its 126th character.
• Use the USB root hub (USB port on
the PC itself) for connecting the
peripheral devices to avoid the
malfunction of XA-HD500.
• Use the supplied USB cable for
connection. When connecting to a PC
with a USB hub or a USB extension
cable, the XA-HD500 may not work
properly.
• While connecting to the PC through
the USB cable, no operation is
possible on the XA-HD500.
• When connecting the XA-HD500 to
the PC, Resume Play is cancelled.
Next time you start playback, playback
starts from the first track of all the
stored tracks.
HD500_QG-B02.book Page 13 Thursday, September 29, 2005 6:17 PM