Interconnect diagram – Jensen JSIR900B User Manual

Page 7

Advertising
background image

128-7369

7 of 12

a. In a major city, where Sirius ground repeaters

are present, you can usually place the
antenna away from a window and still achieve
the desired results.

b. You can also place the antenna outside (on the

roof structure), provided it is clear of any
overhead obstructions. Because of the orbiting
characteristics of the Sirius Satellites, the
strength of the received signal may change over

5. Installing/Positioning the Antenna

For best reception, the supplied antenna should
be placed near a window if in the house or, if
outdoors, in an open area and as high as possible;
some repositioning may be required to achieve
optimum results. The following guidelines are
recommended:

-7-

2. After making sure the connectors are properly

lined up, gently press down on the Receiver to mate
the connectors together. The Receiver should now
be nestled securely in the Boom Box compartment.
Lower the JSIR900B cover into position over the
Receiver; This will prevent accidental Receiver
disconnect. Apply power to the JSIR900B by pressing
the Power ON/OFF button; the LED indicator lights
green. If the Receiver does not turn on at the same
time, press the red Power On/Off button in the upper
left corner of the Receiver front panel.

4. Removing the Receiver From the JSIR900B

Press the EJECT button on top of the Boom Box to
raise the cover. Gently grasp the Receiver from the top
and pull straight up to disengage.

Interconnect Diagram

DC POWER
ADAPTER
(DC 12V 2.2A)

RECEIVER
BOOM BOX
JSIR900B

TO AC WALL
OUTLET

RECEIVER
ANTENNA

ANTENNA
JACK (ANT)

DC POWER
ADAPTER
JACK

ANTENNA
STORAGE
SHELF

Advertising