Jwin JB-TH210 - Manual (Page 15)

Micro-size Bluetooth headset V10M10_IM_EN_12032007
www.jWIN.com
- 14 -
OPERATING INSTRUCTIONS
Making a call
Be certain the headset is properly paired with a mobile phone
featuring Bluetooth wireless technology before answering a call.
1. Normal dialing: Press the CALL button and dial the
telephone number on your mobile phone. When the call
connects, it will be heard through the headset.
2. Last number redial: After a call has been made, the number
can be automatically redialed by pressing and holding the
Power/answer button for approximately 3 seconds.
3. Voice dial function: Press the Power/answer button, the
voice call function will be activated.
Answering a Call
1. An incoming phone call will be indicated by a ring. Press the
Power/answer button once to answer the call.
2. If the headset is off when there is an incoming call, press the
Power/answer button to turn on the headset and answer the
call as usual.
Notes on Answering a Call
•
When there is an incoming call, some phones might not ring
when paired with JB-TH210, but there will be a beeping
sound from the headset.
Press the Power/answer button to
answer the phone when you hear this beep.
• Similarly, some phones may not send an incoming call signal
to the headset. Press the Power/answer button when the
phone rings.