Jensen SMPV-xGBLB - Manual (Page 10)

10
MODE button to confirm.
Fine REC In WAV format (good sound quality)
Long REC In ACT format (average sound quality)
Fine VOR In WAV format (good quality voice-controlled recording :
recording will pause if no sound)
Long VOR In ACT format (average quality voice-controlled recording :
recording will pause if no sound)
Note on warning messages:
“Over Record” - It means there is no more room for new recording files. Please delete
file(s) not to be kept to free up memory space.
“Catalog is Full” - It means there are already 99 recording files in the current folder. Please
change to another folder.
Exit:
Choose EXIT to return to record standby mode.
After all settings are determined, press the PLAY button once to start recording. You can press
“PLAY” at anytime to stop recording and then press “PLAY” again to resume. Press & hold the
MODE button to stop recording and save the sound file.
5. VOICE mode
Select the Voice icon from the main menu using the / buttons. Press the MODE
button to enter.
5.1 Press the PLAY button to start playing the current track.
5.2 While playing, press the PLAY button to pause and press again to resume.
5.3 To adjust the volume level, press the VOL button, and then use the / buttons for
volume up/down adjustment. This unit has a built-in speaker that is active when the
earbuds are not plugged in.
5.4 To skip to the previous or next track, use the / buttons. Press & hold the /
buttons to search within the track.
5.5 While playing, tap the PLAY button and then by pressing & holding the MODE button, you
will always return to the main menu.
5.1 Voice playing mode
When the recorded voice starts to play, tap the MODE button to enter the voice setting mode.
The following options are present (similar to the Music Mode).