JBL SB210 - Manual

Satellite
Outputs
Left Right
System #5 in Stereo
SPL (at 20 Feet):
94 dB Continuous (peaks of 104 dB)
From
Power
Amp
Left
Right
MODULE SETTINGS:
Stereo / Mono Selector: Stereo
4-Ohm / 8-Ohm Selector: 4-Ohms
Input
Terminals
Control SB-210 with
MTC-210-SAT Crossover Input Module
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Using subwoofers and satellite loudspeakers with a pre-engineered passive crossover built into the
subwoofer can be a very effective way of achieving high-fidelity sound economically for applications
requiring greater bandwidth than is typically possible from full-range speakers alone.
When applied properly, small subwoofer-satellite systems – often referred to as “sub-sat” systems –
can provide high fidelity sound for a wide variety of applications, such as restaurants, retail stores,
hotels, music cafes, leisure venues, sports bars & lounges, fitness centers, themed applications, and
many more.
This guide provides recommended subwoofer-satellite configurations that work well together. In
addition, the Connection Information and System Design sections provide important information
for applying these subwoofer-satellite systems properly.
APPLICATION GUIDE
Subwoofer-Satellite Systems
Using Control SB-210 & SB-2 Subwoofers
System #5 in Stereo Mode Shown