JVC CA-MXSK1 - Manual (Page 92)

– 10 –
English
Selecting the Sources
To listen to the FM/AM broadcasts, press FM/AM.
(See page 12.)
To playback CDs, press DISC
3¥8. (See pages 13 – 16.)
To playback tapes, press TAPE-A
2 3 or TAPE-B 2 3.
(See page 23.)
To select the external equipment as the source, press AUX.
When you press the play button for a particular source
(FM/AM, DISC
3/8, TAPE-A 2 3, TAPE-B 2 3 and
AUX), the unit turns on (and the unit starts playing the source
if it is ready — COMPU PLAY CONTROL).
About the audio level indicator
All the audio level indicators light up when no signals come in. The
audio level indicators light up when no signal comes in during AUX.
The audio level indicators does not represent actual audio level. This
is not a spectrum analyzer display.
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted in 32 steps (VOL MIN,
VOLUME 1 — VOLUME 30 and VOL MAX).
Turn VOLUME + / – clockwise (+) to
increase the volume or
counterclockwise (–) to decrease it.
When using the remote control, press VOLUME + to increase
the volume or press VOLUME – to decrease it.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on headphones.
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, a
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source next time.
REMEMBER you cannot adjust the volume level
while the unit is on standby.
To turn down the volume level temporarily
Press FADE MUTING on the remote control.
The volume level gradually decreases to
“VOL MIN.”
To restore the sound, press the button again.
Reinforcing the Bass Sound (ACTIVE BASS EX.)
The richness and fullness of the bass sound is
maintained regardless of how low you set the
volume.
You can use this effect only for playback.
To get the effect, press ACTIVE BASS EX. (Extension).
ACTIVE BASS EX. indicator lights up on the display.
To cancel the effect, press the button again.
Emphasizing the sound (SOUND TURBO)
High and low frequencies are highly boosted.
To get the effect, press SOUND TURBO.
SOUND TURBO indicator lights up on the
display.
To cancel the effect, press the button again.
Select Sound Turbo function will turn the Sound Mode off. While
the Sound Turbo turns off, the Sound Mode automatically restores to
previous setting.
Continued
SOUND TURBO indicator lights up.
VOLUME
OR
VOLUME
OR
SOUND
TURBO
SELECT
FADE
MUTING
ACTIVE BASS EX. indicator lights up.
ACTIVE
BASS EX.
ACTIVE
BASS EX
OR
ACTIVE
BASS EX.
SOUND
TURBO
CA-MXSK_ENUE01-12.p65 17/10/03, 9:32 AM 10