JVC CA-MXSK1 - Manual (Page 95)

– 13 –
English
Playing Back CDs (CD/CD-R/CD-RW)
This unit has been designed to playback the following CDs:
• CD (Audio CD)
• CD-R (CD-Recordable)
• CD-RW (CD-ReWritable)
Continuous use of irregular shape CDs (heart-shape,
octagonal, etc.) can damage the System.
General Notes
In general, you will have the best performance by keeping
your CDs and the mechanism clean.
• Store CDs in their cases, and keep them in cabinets or on
shelves.
• Keep the system’s disc trays closed when not in use.
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back only if they are already
“finalized.”
• You can playback your original CD-Rs or CD-RWs
recorded in music CD format. (However, they may not be
played back depending on their characteristics or recording
conditions.)
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or the player’s lens is dirty.
• CD-RWs may require a longer read-out time. This is
caused by the fact that the reflectance of CD-RWs is lower
than for regular CDs.
Loading CDs
On the unit ONLY:
1
Press CD Open/Close
0.
The unit automatically turns on and the disc
tray comes out.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press DISC SKIP and place the
next CD.
When you press the button, the tray turns for
the next CD.
4
Repeat steps 3 for the last CD.
5
Press CD Open/Close
0.
The tray is closed.
When placing a disc in the tray
Be sure to position the disc inside the recess correctly. Otherwise,
the message "NO DISC" will appear in the display, and the disc may
be damaged or the unit may be damaged when the tray is opened, or
it may be difficult to remove the disc from the unit.
About the disc indicators
Disc Number Indicator: Lights all the time
Selected Disc indicator: Lights for the currently selected disc
number.
Disc Rotation indicator: Runs when the selected CD is played or
paused. This indicator goes out if a CD is
not loaded for the selected disc number.
Once the tray is ejected, the Disc
Rotation indicators for all disc numbers
are lit. However, when the empty disc
number is selected, the Disc Rotation
indicator for the disc number goes out.
Shows that this disc number is selected
1 2 3
Example of indication:
When disc tray has ejected once and then DISC 1 is
pressed. (DISC 1 is selected)
Shows that the disc is rotating
SELECT
Label side up
1
Selected Disc
indicator
Disc Number indicator
Disc Rotation indicator
CA-MXSK_ENUE13-23.p65 14/10/03, 10:50 AM 13