JVC RM-SRX7032U - Manual (Page 49)

46
English
To change the transmittable signals for
operating a CATV converter or DBS tuner
1. Press and hold CATV/DBS .
2. Press CATV/DBS CONTROL.
3 Enter a manufacturer’s code using buttons 1 – 9,
and 0.
See the list on the right column to find the code.
4. Release CATV/DBS .
The following buttons can be used for operating a CATV
converter and DBS tuner:
CATV/DBS : Turn on and off a CATV converter or DBS
tuner.
After pressing CATV/DBS CONTROL, you can perform the
following operations on a CATV converter or DBS tuner:
CH +/–: Change the channels.
1 – 10/0, 0, 100+ (+10):
Select the channels.
The 10/0 button will function as the ENTER
button if your equipment requires pressing
ENTER after selecting a channel number.
5. Try to operate your CATV converter or DBS
tuner by pressing CATV/DBS .
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or DBS tuner, try each one until the correct
one is entered.
Note:
You cannot preset the signals for both the CATV converter and DBS
tuner at the same time.
For CATV converter
Manufacturer Codes
General Instrument 06, 07, 08, 09, 10, 11,
12, 13, 14, 29
Hamlin/Regal 01, 02, 03, 04, 05
Jerrold 06, 07, 08, 09, 10, 11,
12, 13, 14
Oak 15, 16, 17
Panasonic 18, 19, 20
Pioneer 21, 22
Scientific Atlanta 23, 24, 25
Tocom 26
Zenith 27, 28
Manufacturer Codes
JVC 56 * , 57, 67
Amstrad 43, 44, 45, 46, 47, 48, 49
Blaupunkt 30
Echostar 50, 51, 67
Goldstar 31
Grundig 32, 33
Hirshmann 48, 52, 53, 54, 55
Instrument 68
ITT/NOKIA 34
Kathrein 52, 58, 59, 60, 61, 62, 63
NEC 35, 36
Orbitech 48
Philips 37, 38
RCA 65
Samsung 39, 40
Schwaiger 61, 64
Siemens 41, 42
Sony 66
Technisat 48
For DBS tuner
*Initial setting
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
40-50_7032[US]f.pm6 03.3.13, 4:31 PM 46