Jensen JCR-275 - Manual (Page 9)

E-8
5. Turn off your external audio device first when you finish listening.
6. Then unplug the stereo cord from the AUX IN JACK (#17) and normal radio reception will
resume.
INFRARED SENSOR FUNCTION
1. In radio off mode, to display indoor temperature and alarm time settings:
Wave your hand over the IR
SENSOR (#16) once to show
the indoor temperature
Wave your hand over the IR
SENSOR (#16) again within 1
second to show the ALARM 1
time
Wave your hand over the IR
SENSOR (#16) again within 1
second to show the ALARM 2
time
2. In radio on mode, to turn sleep function on:
- Wave your hand over the IR SENSOR (#16) for about 2 seconds to
turn on the sleep function, the “sleep” icon will flash in the LED
display.
- Sleep time can only be set for a maximum 90 minutes.
- Press the SLEEP BUTTON (#3) to change the sleep time as
described before.
- Press the ON/OFF BUTTON (#5) to cancel the sleep function.
3. While the alarm is sounding, to turn snooze function on:
- Wave your hand over the IR SENSOR (#16) once to activate the snooze
for 9 minutes.
4. In radio on mode, to display the radio frequency and in door temperature: