Jwin JT-P433 - Manual (Page 16)

Vintage Design Telephone with Caller ID V10M10_IM_EN_01282008
www.jWIN.com - 15 -
OPERATIONAL INSTRUCTIONS
Dialing from Two-Touch Memories
- Under off-hook state, press the AUTO/VIP button, the LCD will display
“INPUT ADDR”
- Press the desired two-touch location from 0-9 and the LCD will display the
number
- Press the SET/BACK button and the number will be dialed out
automatically.
- Under on-hook state, press the AUTO/VIP button, the LCD will display
“INPUT ADDR”
- Press the desired two-touch location from 0-9, the LCD will display the
number and it will be dialed out automatically.
Deleting a Two-Touch Memory Number
- Under off-hook state, press the RECALL/VIP button, the LCD will display
“INPUT ADDR”
- Press the desired two-touch memory from 0-9 and the LCD will display the
number
- Press the DEL button twice to erase the number and the LCD will display
“NO CODE”
Forwarding a Call to an Extension Line
- When the call forwarding to extension line was set as “ON”, under DTMF
mode, if you want to transfer the call to the extension line, press “＊” and
then press the extension number
- You will here the ‘beep’ sound and wait for the extension line to receive
the call
- When the extension line is received successfully, you may have
conference call with the extension line and the third party or just place
back the handset to complete the call. The extension line and the third
party can continue the conversation.
Note:1. You must forward the call to extension line within one minute after
picking the phone, otherwise, the forwarding function will be exit automatically.
2. When entering the extension number, wait one second between the digits.
3. When entering the extension number, if wait more than 10 seconds between
the digits, the call forwarding will be cancelled automatically.
VIP Function
- When reviewing the incoming call, press the AUTO/VIP button once to
save this number as VIP.
- When there is an incoming call, the VIP ringer melody will indicate this is
the caller from VIP.
- VIP cannot be erased from the caller Id list
- If you want to cancel the VIP of the number, press the AUTO/VIP button
again.