Audio and system preference, Progressive mode, Digital audio output – JVC XV-S60BK User Manual
Page 50
Initial settings
"&
In
itia
ls
etti
ng
s
16:9 AUTO (Wide Television screen)
Should be selected
when you connect a
wide-screen TV to the
unit.
16:9 NORMAL (Wide Television screen)
Should be selected when you connect the unit to a
wide-screen TV whose aspect ratio is fixed to 16:9 (the
unit automatically adjusts the screen width of the
output signal correctly when playing back a 4:3
source).
4:3 MULTI LB
4:3 MULTI PS
16:9 MULTI AUTO
16:9 MULTI NORMAL
These MULTI options should be selected when you
connect the unit to a TV that supports both the PAL
and NTSC systems. If you select one of these options,
the unit outputs a PAL or NTSC video signal according
to the disc, regardless of the NTSC - PAL selector
setting.
PROGRESSIVE MODE
You can select the
progressive mode from the
following options.
AUTO
The unit recognizes the picture type (film or video
source) of the current disc according to the disc
information.
VIDEO 1
Suitable for playing back a video source disc with
static (inactive) pictures.
VIDEO 2
Suitable for playing back a video source disc with
dynamic (active) pictures.
FILM
Suitable for playing back a film or progressive source
disc.
SMART
Used to playback a disc containing both video and
film source materials. The unit recognizes the picture
type according to the current data.
* Normally, set the PROGRESSIVE MODE to AUTO.
* Some DVD VIDEO discs may not be played back
correctly with the AUTO mode. If the playback
picture is unclear or noisy with a particular DVD
VIDEO disc, try to change the mode.
The
PREFERENCE 2
display handles preferences
related to audio and system.
DIGITAL AUDIO OUTPUT
To connect the units digital
output to an external device
equipped with a digital
input, this item must be set
correctly.
PCM ONLY
Should be selected when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital input of
other audio equipment.
STREAM/PCM
Should be selected when you connect to the digital
input of an amplifier with a built-in DTS, Dolby Digital,
or MPEG multichannel decoder.
DOLBY DIGITAL/PCM
Should be selected when you connect to the digital
input of a Dolby Digital decoder, or an amplifier with a
built-in Dolby Digital decoder.
NOTES
If a disc does not support 4:3 Pan Scan, the letter box
screen appears even if you set the MONITOR TYPE to
4:3 LB
.
If you playback a 4:3 DVD VIDEO source with the
16:9 NORMAL mode, the picture character slightly
changes due to the process for converting the picture
width.
PREFERENCE2
PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
SELECT
KEY
PROGRESSIVE MODE
AUTO
4:3 LB
NOTE
When playing back a film-source DVD VIDEO disc with
the PROGRESSIVE MODE set to FILM, SMART or
AUTO and the progressive scan mode is active,the
PROGRESSIVE indicator on the front panel lights. (See
page 15.)
Audio and system preference
PREFERENCE2
PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo/Ro
COMPRESSION
ON
AUTO STANDBY
OFF
SCREEN SAVER
SELECT
KEY
MODE 1
AV COMPULINK MODE
DVD 1
6(1*ERRN 3DJH )ULGD\ -XQH $0