JVC CA-FSXA1 - Manual (Page 43)

39
5
Press cursor 2/3 to select the
playback source, then press
SET/QP LINK.
• Each time you press the button, the clock
setting changes as follows:
• When selecting the tuner, press cursor
2/3 to select a preset channel.
• When selecting “DISC”, you can specify the
group and track. For the discs other than
MP3/WMA, the group selection does not
take effect.
6
Press cursor 2/3 to adjust the
volume level, then press SET/
QP LINK.
7
Turn off the system.
To turn off the timer setting
1
Press CLOCK/TIMER repeatedly
to select the timer setting.
2
Press CANCEL to turn off the
selected setting.
• Pressing SET/QP LINK activates the timer
setting again.
If there is no operation for 3 minutes while the disc is
stopped, the power will be automatically turned off.
Press A.STANDBY during playback
or while the disc is stopped, or no
disc is loaded (“NO DISC” appears).
The A.STANDBY indicator lights on the display
window on the main unit.
When a stopped state is entered (after playback is
finished, for example), the A.STANDBY indicator
starts blinking.
This means that the power will be turned off
automatically if there is no operation for 3 minutes.
And 10 seconds before the power is turned off,
“A.STANDBY” starts flashing.
Releasing Auto Standby
Press A.STANDBY.
“A.STANDBY” will be turned off on the display
window on the main unit.
NOTE
When the source is FM, AM or AUX, Auto Standby
does not work.
TUNER FM
TUNER AM
AUX 1 AUX 2
DISC
Auto Standby
Convenient functions
FS-XA1[B].book Page 39 Wednesday, March 22, 2006 1:34 PM