JVC CA-V808T - Manual (Page 25)

21
English
The Quickest Way to Start a CD Is with the One Touch Operation ——————
The power comes on, and operations are done automatically.
❏ Press the CD or
‹/8 (SELECT) button (or the £ (SELECT) button on the Remote Control).
• If there is a CD in the disc tray of the selected (lit) disc number, playback begins from the
first track of that disc track where it was interrupted. With some video CDs, the initial menu
may appear in the television screen and the display window shows “PBC”. See page 29
“Operation of Playback Control Function”.
• If there is no CD in any of the disc trays, the message “NO DISC” appears in the display.
❏ Press a DISC button (1 to 3).
• If there is a CD in the disc tray for the disc number you have selected, playback begins from
the first track of that disc. With some video CDs, the initial menu may appear in the
television screen and the display window shows “PBC”. See page 29 “Operation of Play-
back Control Function”. If there is no CD in the disc tray, the message “NO DISC” appears
in the display.
❏ Press the 0 button.
• The power turns on, and the tray opens automatically.
Basics of Using the Video CD Player — Continuous Play
You can play the discs continuously in the DISC 1 to DISC 3 trays.
To Insert Discs ——————————————————————————
1.
Press the 0 0 0 0 0 button on the right of the tray you want to insert the disc into.
The disc tray slides out automatically.
2.
Place a CD, with its label side up, onto the tray.
ATTENTION: To avoid malfunctions when you play a CD, please set the CD in the right place at
the center of the tray.
3.
Press the 0 0 0 0 0 button to close the tray.
4.
Repeat steps 1 to 3 to insert other discs into other trays.
• To continue putting discs into other trays, even if a tray is open, by pressing the 0 button of
another disc tray, the open tray will close automatically, and the new disc tray will slide out.
❏ To put an 8 cm CD into a tray, insert it so that it is aligned with the groove in the tray’s center.
❏ “OPEN” appears in the display when a tray opens, and “CLOSE” when a tray closes.
❏ If a tray is open when the CA-V808T switches to Standby mode, the tray is closed automati-
cally.
Note: When the Video CD Player is reading a disc, “- - - -” appears in the display. While this is
being displayed, the
0 button or DISC button cannot be used. Once the display changes from “- - - -”
to another display, the 0 button and DISC button can be used.
CORRECT INCORRECT
CD
Tray
or