JVC 0797TOV*UN*VP - Manual (Page 58)

58
EN
OFF
P
L
A
Y
A
M
5S
T W
MENU
Dubbing
You can copy recorded scenes from the camcorder onto a videotape. Refer to your VCR’s instruction manual
for details.
NOTES:
● You can use Playback Zoom (
੬
pg. 50) or
Playback Effects (
੬
pg. 51) in step 2.
● Before you start dubbing, make sure that the
indications do not appear on the connected TV. If
they do appear during dubbing, they are being
recorded onto the new tape.
To clear the Playback Sound Mode Display, press
DISPALY on the RM-V711U Remote Control.
● Select “DISPLAY” and “TIME CODE” from the
Playback Menu (
੬
pg. 52) to show or hide the
Date/Time and the Time Code on the recording.
● To show or hide all indications, press the
IND.ON/OFF button on the camcorder for longer
than 1 second.
1 MAKE CONNECTIONS
Connect the Docking Station to your VCR as
shown in the illustration on pages 56, 57.
Please also refer to your VCR's instruction
manual before dubbing.
2 START PLAYBACK
Press the Play button to play back the source
tape.
3 START RECORDING
While watching on the connected TV, engage
your VCR’s record mode from the spot on the
source tape you want to begin recording.
4 PAUSE RECORDING
Engage your VCR’s pause mode to stop
recording a segment.
5 END RECORDING
Press the Stop button to stop the source tape,
and engage the VCR’s stop mode.
EDITING
Play button
Stop button
IND.ON/OFF
button
PLAY
DISPLAY
STOP
RM-V711U
(provided)
VCR (Recording deck)
Power Dial