Antenna connections – JVC TV-20F243 User Manual

Page 14

Advertising
background image

12

UHF/
VHF

If you are using outdoor antenna (outdoor antenna not included), follow the instructions below that
correspond to your antenna system. If you are using a cable TV service (CATV), see page 13 for Cable TV
connections.

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

ANTENNA CONNECTIONS

Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300 ohm
twin-lead wire to the 300-75 ohm matching trans-
former. Attach the transformer to the combiner, then
attach the combiner to the antenna jack.

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Connect the 75 ohm cable from the combination VHF/
UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm
twin-lead wire, the use of the 300-75 ohm matching
transformer may be necessary.

Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner. Attach the combiner
to the antenna jack.

UHF/
VHF

UHF

/

VHF

UHF

/

VHF

75 OHM
COAXIAL
CABLE

VHF 300 ohm

UHF 300 ohm

300-75 OHM
MATCHING
TRANSFORMER
(not included)

COMBINER
(not included)

300-75 OHM
MATCHING
TRANSFORMER
(not included)

VHF 75 ohm

UHF 300 ohm

COMBINER
(not included)

5B40401A-E/P10-19

15/01/2002, 12:54

12

Advertising