JVC CA-MXDK11 - Manual (Page 6)

3
Connections
• Connect VIDEO OUT directly to the video input of your
TV. Connecting VIDEO OUT to a TV via a VCR may cause
a monitor problem when playing back a copy-protected disc.
You may also have a monitor problem when connecting the
player to an integrated TV/Video system.
Do not connect the AC power cord until all other
connections have been made.
Supplied Accessories
• FM antenna (1)
• AM loop antenna (1)
• Composite video cord (1)
• Remote control (1)
• Batteries (2)
• AC plug adaptor (1) (not supplied for the Middle East
and Australia)
If any item is missing, consult your dealer immediately.
~
From AM/FM antenna
See page 4.
!
From the digital input of digital audio
component such as CD recorder, etc.
See page 4.
Ÿ
From the video input of TV/monitor
See page 4.
#
To a wall outlet
Plug in the AC power cord only after all connections are complete.
• Before plugging in, confirm the position the voltage selector points
to. See page 6 and the back cover.
• If the wall outlet does not match the AC plug, use the supplied AC
plug adaptor (not supplied for the Middle East and Australia).
¤
Voltage Selector
Before plugging in, confirm the position
the voltage selector points to. See page 6
and the back cover.
@
From speakers
See page 5.
From auxiliary equipment
See page 5.
MX_DK11.book Page 3 Wednesday, December 13, 2006 5:11 PM