JAI AD-081GE - Manual (Page 68)

AD-081GE
67
Register Map
The table below provides detailed information for the hardware registers used for controlling
the camera and obtaining information on the status of the camera. The content of this register
map is also found in the XML file, as stipulated by the GenICam standard.
Image Format Control
Address Display Name
(JAI Control Tool)
GenICam name
Read /
Write
Size Value / Range of value Description
Default
value
0xA400 Width Max WidthMax R 4 1024 Width max 1024
0xA404 Height Max HeightMax R 4 768 Height max 768
0xA410 Pixel Format PixelFormat
RW
4
Mono CCD(080/081)
0x01080001
0x010C0004
0x01100003
0x01100005
0x010C0006
Mono8
Mono10Packed
Mono0
Mono12
Mono12Packed Mono8
0xA500 ROI Mode ROIMode
RW
4 1 to 5
1:ROI disable
2 to 5: Enable
1
0xA504 ROI 1 Width Width
RW
4 8 - 1024 Width W.Max
0xA508 ROI 1 Height Height
RW
4 8 – 768 Height H.Max
0xA50C ROI 1 Offset X OffsetX
RW
4 0 – 1016 Horizontal offset 0
0xA510 ROI 1 Offset Y OffsetY
RW
4 0 – 760 Vertical offset 0
0xA514 ROI 2 Width Width2
RW
4 8 - 1024 Width 2 W.Max
0xA518 ROI 2 Height Height2
RW
4 8 – 768 Height 2 H.Max
0xA51C ROI 2 Offset X OffsetX2
RW
4 0 – 1016 Offset X2 0
Device Information
Address Display Name
(JAI Control Tool)
GenICam name
Read /
Write
Size Value / Range of value Description
Default
value
0x0048 Device Vendor Name DeviceVendoeName R 32 Manufacture of this device
0x0068 Device Model Name DeviceModelName R 32 Model Name of this device
0x0088 Device Version DeviceVersion R 32 Version of this device
0x00A8
Device Manufacturer
Info
DeviceManufacturerInfo R 48
Provides extended
manufacturer information
about the device.
0x00D8 Device ID DeviceID R 16 Camera serial number
0x00E8 Device User ID DeviceUserID RW 16
User assignable string (16
Byte)
0xA714 FPGA version DeviceFPGAVersion R 4
0xA034 Sensor Type SensorType R 4
2=AD-081GE Mono
Sensor1(interface #0)
3=AD-081GE Mono
Sensor2(Interface #1)
0xA640 Device Reset DeviceReset W 4 Command=1
0xA1FC Temperature Temperature R 4 0.0625° step -55 ℃ ～ 150 ℃