GE 24927 GE Universal Remote - Manual (Page 10)

9
Programming For Cable
1. Manually turn on the Cable Box.
Find the three digit code for your Cable Box
in the code list below.
2. Press and hold the
CODE SEARCH but-
ton until the INDICA-
TOR LIGHT lights,
then release the CODE
SEARCH button.
3. Press and release
the CBL button (The
INDICATOR LIGHT
will blink then
remain lit.
4. Enter the code
using the Number
Buttons. After your
code is entered, the
INDICATOR LIGHT
will turn off. If the
code is not valid, the
INDICATOR LIGHT
will blink. Check the
code list and repeat
process.
5. Aim the remote at
your CABLE and press
the ON•OFF button.
Your CABLE should
turn off.
6. With your Cable Box on, press CHAN+
(CHANNEL UP). If the Cable Box responds,
no further programming is required.
NOTE: If your Cable Box does not respond,
try all the codes for your brand. If the codes
do not work, or your brand is not listed, try
the Code Search method.
7. Enter your code here for easy reference.
CABLE BOX CODE
LIST
CABLE BOX CODE
CHAN +
ON•OFF
1 2 3
4 5 6
7 8 9
0
(OFF)
(BLINK)
INDICATOR
LIGHT
CABLE
CODE
SEARCH
24927 Revised Size 7" x 2 3/4" 8/19/03 9:10 AM Page 10