D-vhs recorders, Integrated digital terrestrial receiver, Mpeg-2 codec to record various sources digitally – JVC 2006 User Manual

Page 6: 1ch dolby digital sound, Linear pcm digital audio capability, I.link terminals, Full spec hdtv compatible

Advertising
background image

D-VHS Recorders

5

Integrated Digital
Terrestrial Receiver

The integrated digital terrestrial receiver is all

you need to enjoy full access to ATSC digital

terrestrial broadcasts, all the way from

standard definition (SD) to 1080i high

definition. Since the digital terrestrial receiver

is built in, you do not need an IEEE 1394

connection and an extra STB (for ATSC

broadcasts). The HM-DT100 receives all

forms of ATSC digital terrestrial programs

including high-definition broadcasts, records

them exactly “as they are” with no loss of

quality, and plays them back whenever you

want.

Single, Uncompressed,
Digital HDMI™
Connection with
Content Protection
(HDCP) Technology

Adopted by over 100

manufacturers, the digital

HDMI™ interface is already set to become

the standard of the future. It delivers

uncompressed digital video and audio signals

to your display, so there is no signal

deterioration. HDMI™ prevents any signal

loss by transferring video digitally, without

going through an analog interface or

performing unnecessary digital-to-analog

conversions, delivering a pristine signal that

produces lossless images identical to the

original. Not only does HDMI™ give you the

highest quality images, but also true-to-life

sound to intensify your home theater

experience.

Backed by major motion picture studios,

HDMI™ provides digital content that truly

reflects the filmmaker’s original vision. To

support secure one-way transfer of digital

content, the HM-DT100 and HM-DH5 feature

HDMI™ output with content protection

technology called HDCP.

Plus, HDMI™ also transfers video from

existing standard definition analog sources,

after conversion to progressive 480p digital

video for greatly improved image quality. And,

since this breakthrough technology’s single

cable handles both video and multi-channel

audio, it makes cabling complications a thing

of the past.

* Copy protected contents cannot be transferred through the

HDMI™ output to any device not equipped with an HDCP-
compliant connector. Please be sure to connect to or via
HDCP-compliant devices.

** HDMI™ is compatible with DVI-D so an HDMI™ cable can

be connected to a DVI-D-compatible TV display using a
DVI conversion cable. However, please be sure to verify
that the source unit is HDCP-compliant.

*** The DVI-D cable does not carry audio signals.

HDTV Compatible MPEG-2 HD Decoder
and HDTV Component Output

In addition to HDMI™ digital-to-digital

connection, the HM-DT100 and HM-DH5

also support analog connection. The

MPEG-2 HD Decoder converts recorded

MPEG-2 signals into Component output

signals (Y/Pb/Pr). Connect directly to any

HDTV or projector equipped with Component

input terminals to enjoy the full quality of

D-Theater™ software and other high-

definition images.

MPEG-2 CODEC to Record Various
Sources Digitally

The standard definition MPEG-2 encoder

makes D-VHS digital recordings from NTSC

analog sources, as well as converting signals

from a connected MiniDV camcorder to

MPEG-2 and recording them on D-VHS.

Super MPEG Encode Pre-Processor
Enhances Analog Signals for Digital
Recording

To record analog sources in high-quality

digital, the HM-DT100 and HM-DH5 use

JVC’s exclusive Super MPEG Encode Pre-

Processor to eliminate the defects inherent in

analog signals and create new digital

recordings that actually appear to surpass the

original quality. Its Time Base Corrector (TBC)

eliminates jitter, Frame Synchronizer corrects

frame crossover jitter and processes any

deviant frames, and Motion Active Noise

Reduction circuit removes noise from both

still and moving parts of video pictures. The

decks digitally encode and record the now

pristine NTSC-compliant analog input signals,

free of image lag, smear and MPEG artifacts

such as mosquito noise.

5.1ch Dolby Digital Sound

The D-VHS decks record high-

definition broadcasts complete with 5.1ch

surround sound. In addition, HDMI™ and the

optical digital audio output make it easy to

connect and enjoy outstanding audio

performance on your home theater sound

system.

Linear PCM Digital Audio Capability

Thanks to the HM-DT100 and HM-DH5’s

48kHz/16-bit linear PCM recording in either

HS or STD mode, you can record full quality

linear PCM digital sound from a MiniDV

camcorder connected via i.LINK. You can

also record high-quality soundtracks from

analog sources in this non-compressed

digital format to accompany the resulting

high-quality digital image. The PCM audio

data rate uses 1.6 Mbps out of the

28.2 Mbps HS and 14.1 Mbps STD modes.

i.LINK Terminals

IEEE 1394 (i.LINK) digital interface

terminals with DTCP* content protection

technology on the front and rear of the

HM-DT100 and HM-DH5 allow you to easily

connect with i.LINK compatible devices such

as a MiniDV or high-definition camcorders for

convenient digital-to-digital dubbing. You can

also connect the HM-DH5 with a Digital

Set-Top Box (STB) to transfer and record HD

and SD broadcast digital signals**.

* DTCP (Digital Transmission Content Protection) protects

digital content from unauthorized copying. Copy-protected
contents cannot be recorded via i.LINK terminals.
Connected digital devices must be DTCP-compatible to
playback copy-protected digital content.

** Service depends on whether the digital stream provided

by cable systems conforms to the ATSC format.

Full Spec HDTV Compatible

When it comes to HDTV recording, nothing

compares to JVC’s D-VHS. With a

28.2 Mbps HS mode that exceeds the

19 Mbps specification of ATSC MPEG-2 HD

broadcasting formats, D-VHS captures the

full HDTV signal with no data loss

whatsoever. And since a single D-VHS

DF-480 tape holds up to 50 gigabytes of

Mode

Data Rate

Max. Recording Time

When to Use

DF-300

DF-420

DF-480*

HS

28.2 Mbps

2.5 hrs.

3.5 hrs.

4 hrs.

For directly recording HD digital broadcasts with HD quality. Highest quality recording of any digital or
analog source.

STD

14.1 Mbps

5 hrs.

7 hrs.

8 hrs.

To digitally record from digital or analog sources with SD quality.

LS3

4.7 Mbps

15 hrs.

21 hrs.

24 hrs.

To record a large number of programs on a single cassette with average DVD quality.

D-VHS Recording Modes

* Please check for availability.

TBC

(Time Base

Corrector)

MPEG-2
Encoder

Motion Active

Noise

Reduction

Digital 3D

Y/C

Separation

Frame

Synchronizer

Super MPEG Encode Pre-Processor

AUX INPUT

Broadcasting

data, all that picture and sound information

can be recorded in its original, full-quality

1080i or 720p broadcast form for up to

4 hours. Of course, D-VHS also records up to

8 or even 24 hours of standard definition

sources such as 480p* and 480i digital

broadcasts in D-VHS’s 14.1 Mbps STD and

LS3 modes.

* Depending on the bit-rate, HS mode may be applicable.

Advertising