English, 9p q – JVC GM-V42EB User Manual

Page 8

Advertising
background image

7

ENGLISH

9 VIDEO A terminals (page 12)

AUDIO (L/MONO, R) input terminals (pin jack)
Connect these terminals to the audio input terminals of a
VCR, etc.

VIDEO IN terminal (BNC)
Connect this terminal to the video output terminal of a
VCR, etc.

VIDEO OUT terminal (BNC)
Connect this terminal to the video input terminal of
another Monitor, etc.

Note:
• Since the video output terminals on this Monitor are

loop-through terminals, the devices connected to this
video output terminal should be correctly terminated.
Otherwise, pictures become abnormally bright or the
Monitor screen gets affected abnormally.

p VIDEO B terminals (page 12)

AUDIO (L/MONO, R) input terminals (pin jack)
Connect these terminals to the audio output terminals of a
VCR, etc.

Y/C (S video) IN terminal (mini DIN, 4pin)
Connect this terminal to the S-video output terminal of a
VCR, etc.

VIDEO IN terminal (pin jack)
Connect this terminal to the video output terminal of a
VCR, etc.

Note:
• When both the video and S-video terminals are

connected, the S-video terminal will have priority.

q COMPONENT/RGB B input terminals (page 12)

AUDIO (L/MONO, R) input terminals (pin jack)
Connect these terminals to the audio output terminals of
the other equipment.

G, B, R, HD/Cs, VD (VIDEO) input terminals (BNC)
Connect these terminals to the following output terminals
of a personal computer or other equipment:
– Analog RGB signal output terminals
– Horizontal sync (HD) signal or composite (Cs) signal

output terminal

– Vertical sync (VD) signal output terminal

Notes:
• External sync signals are automatically detected when

they come in.

• When both horizontal (HD)/vertical (VD) sync and

composite (Cs) sync are connected, HD/VD sync signals
will be used.

Y, Pb, Pr (VIDEO) input terminals (BNC)
Connect these terminals to the component signal output
terminals of NTSC or high-vision equipment.

Note:
• When these terminals are used as the component

terminals (Y, Pb, Pr)—see “Setting the COMPONENT/
RGB B Input” on page 22, external sync signals (HD/Cs,
VD) cannot be used.

9

p

q

VIDEO A

VIDEO

IN

OUT

AUDIO

L/MONO

R

VIDEO B

VIDEO

IN

Y/C IN

COMPONENT/RGB B

VIDEO

Y/G Pb/B

Pr/R

HD/Cs VD

AUDIO

L/MONO

R

AUDIO

L/MONO

R

EN04_13_GM_V42E&EB.p65

04.2.5, 10:57 AM

7

Advertising