Replacement parts – Jet Tools JDP-17MF User Manual
Page 17
17
Trouble Probable
Cause
Remedy
Excessive drill bit
runout or wobble.
Bent drill bit
Replace drill bit.
Worn spindle bearings.
Replace spindle bearings.
Bit, or chuck not properly installed.
Reinstall the bit, or chuck properly.
Quill returns too
slowly, or too fast.
Spring has improper tension.
Adjust return spring tension
Chuck, or arbor do
not stay in place.
Dirt, grease, etc. on arbor, chuck or
spindle.
Clean all mating surfaces thoroughly
with a cleaner degreaser.
Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848, Monday through Friday (see our website for business hours, www.waltermeier.com).
Having the Model Number and Serial Number of your machine available when you call will allow us to
serve you quickly and accurately.