Jensen AWM950 - Manual (Page 11)

10
CHANGING PARENTAL CONTROL PASSWORD
Use UP/DOWN arrow buttons to select Password item.
Enter old 4 – digital security code
Then enter new 4 digital security code
Press UP/DOWN arrow button to exit
Note : New 4 – digital security code will take effect after closing the Setup menu.
NOTE :
It is necessary to stop the disc playback if you want to enter the PREFERENCES MENU ITEM.
In PREFERENCES MENU ITEM, the system default password is 0000.
Operating instructions
USING THE AUDIO ADJUST BUTTON
1) You can toggle between volume, treble, bass and balance control by pressing the Audio Adjust button (17)
2) Once at the desired function, you can use the volume buttons to adjust.
SETTING THE ALARM
1) Hold the Alarm set button (6)
2) Use the H and M buttons (1 and 2) to adjust hours and minutes.
3) The alarm On/Off button (6) activates or deactivates the alarm.
AS/PS BUTTON
This button is for Auto-Store tuning (AS) and Preset Scan Tuning (PS) (3).
1) Press this button momentarily during radio operation to scan the preset stations in the chosen band’s
memory. The unit will stop at each preset station for approximately 5 seconds before continuing on to the
next preset station. Press this button momentarily to stop preset scan operation and remain on the
current station.
2) A press of this button for longer than 2 seconds will activate the Auto-Store tuning feature which will
automatically scan the band and enter up to 6 strong stations into the preset memories. After entering
the stations into the memories, the unit will automatically stop at each station for approx. 5 seconds so
each station can be heard.
Note ; if you have already set the preset memories to your favorite stations, activating the Auto-Store feature
will erase those stations and enter the new strong stations.