JVC 2EN - Manual (Page 11)

12
EN
RECORDING Basic Recording
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
● Power (
੬
pg. 4)
● Tape Length Setting (
੬
pg. 8)
● Recording Mode Setting (
੬
pg. 8)
● Grip Adjustment (
੬
pg. 10)
LOAD A CASSETTE
1
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
ENTER RECORD-STANDBY MODE
2
Slide the LENS COVER Open/Close Switch to open
the lens cover, then set the Power Switch to
CAMERA.
•The power indicator lights and the camcorder
enters the Record-Standby mode.
•The scene you’re aimed at appears on the
viewfinder screen, with the word “PAUSE”
superimposed upon it.
START SHOOTING
3 Press the Recording Start/Stop Button.
•“ REC ” appears in the viewfinder while recording is
in progress.
Power
indicator
Tally lamp
(lights while recording is in progress)
Power Switch
Start/Stop Button
LENS COVER Switch