Jet Tools Jet Drill Press JDP-15M/MF - Manual (Page 16)

16
Troubleshooting (cont.)
Trouble Probable Cause Remedy
Excessive drill bit
runout, or wobble.
Bent drill bit. Replace drill bit.
Worn spindle bearings. Replace spindle bearings.
Bit, or chuck not properly installed. Reinstall the bit, or chuck properly.
Quill returns too slow,
or too fast.
Spring has improper tension.
Adjust spring tension. See the Return
Spring Adjustment section.
Chuck or arbor does
not stay in place. Dirt, grease, etc on arbor, chuck, or
spindle. Clean all mating surfaces thoroughly
with a cleaner degreaser.
Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848, Monday through Friday (see our website for business hours, www.waltermeier.com).
Having the Model Number and Serial Number of your machine available when you call will allow us to
serve you quickly and accurately.