Jwin JL-CD815 - Manual (Page 10)

Stereo CD Player with Dual Alarm Clock Radio V11M11_IM_EN_10102007
www.jWIN.com - 9 -
OPERATIONAL INSTRUCTIONS
About the CD Player
Your CD clock radio can play audio CDs, CD-R and CD-RW discs. Playback quality of CD-RW
discs may be affected by the following variables:
• Variation in CD-RW brands
• The disc recording speed
• The software used to create the CD
Notes: This CD clock radio is designed to play on a stable surface not subject to vibration.
Bumping the set during CD playback, may cause the music will stop or skip for a few seconds.
This is normal.
Selecting the CD Player
1. Slide the FM/AM/CD Switch to CD.
2. Slide the BUZZ/AUTO/OFF/ON Switch to ON.
If the CD compartment is empty is empty, “00” appears briefly on the LCD screen followed by
the word “No.”
Basic CD Operation
Playing a CD
1.
Lift the CD door and place a CD in the compartment with the label facing upwards.
2. Close the door.
3. Press the CD PLAY/PAUSE button to begin playback. The LCD screen will display
and the current track number.
Pausing Playback
• Press
the PLAY/PAUSE button during CD playback to pause. Press again to resume
playback.
Stopping Playback
• Press
the STOP button to stop playback.
Skipping Tracks
1. Press
the SKIP/SEARCH FORWARD button to skip to the next track.
2. Press the SKIP/SEARCH BACKWARD button to return to the previous track(s).
Searching Tracks
1.
Press and hold the SKIP/SEARCH FORWARD button to search forward during playback.
2. Press and hold the SKIP/SEARCH BACKWARD button to search backward during
playback.
Adjusting the Volume
• Use
the VOLUME control on the left side of the unit to control the sound level.