Jonsered CS 2145S - Manual (Page 40)

40 – English
TECHNICAL DATA
EC-declaration of conformity
(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws
Jonsered CS 2141, CS 2141S, CS 2145S and CS 2150 from 2002's serial numbers and onwards (the year is clearly
stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the
COUNCIL'S DIRECTIVES:
- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
- of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN292-2, CISPR 12:1997, EN608.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The certificates for
EC type examination in accordance with annex VI, have the numbers: 404/00/750 – CS 2141, CS 2141S, 404/00/750 –
CS 2145S, 404/00/749 – CS 2150
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The certificates have the numbers: 01/161/037 - CS 2141, CS 2141S, CS 2145S, 01/161/062 - CS 2150S.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna October 23, 2007
Bengt Frögelius, Development director chainsaw R