GE RM24945 - Manual (Page 11)

21 20
If the Remote does not operate your device,
TV, VCR, Cable Box, etc.
• Press the device button of the product you want
to control.
• Program the remote with a new code.
• Install new batteries. (You might have to
reprogram your remote after installing new
batteries.)
• Remote may not be compatible with your
product.
If the Remote does not operate some features
of your device.
• Sometimes a particular code might operate
some features but not all. Try programing
remote with a new code.
• Remote may not be able to operate all features
of your product or button names might be
different than your product.
If the Red Indicator blinks after you program a
product code.
• Remote did not accept the code.
• Try to program the code again or try a different
code.
Tips on using the FIND IT feature
For best results, hold the Remote with the LED
pointing away from you. Walk around while trying to
find the item you’re looking for while repeatedly
pressing the appropriate button on the Remote.
Reduce or eliminate noises so you can hear the
beeping unit you are looking for.
Keep the Remote away from large metal objects
and other radios sources that might reduce its
range, as do weak batteries also.
Troubleshooting
Using a FIND IT Keyfob to find a
misplaced FIND IT Remote
To find a misplaced FIND IT Remote, simply press
the button on one of your FIND IT Keyfobs
corresponding to the item # you set your FIND IT
Remote to (1 thru 6). If the Remote is in range, it will
begin to flash its LED and beep.
The maximum distance the lost Remote can be
from the Keyfob is about 30 ft. Therefore, it may be
necessary to walk to various points in your home in
order for it to function.
Occasionally it may be necessary to press the
number on the Keyfob more than once even when
the Remote is within range due to interference or
other factors.
Checking Your Setup
To verify the ITEM # of a Remote:
Press and hold the FIND button on the Remote,
then press and release button # 2, then release the
FIND button. The LED flashes and beeps to indicate
the ITEM #. For example, if the Remote you are
checking is defined as ITEM # 4, you would hear 4
beeps.
To verify the ITEM # of a Keyfob:
Press and hold the 5 and 6 buttons on the Keyfob
simultaneously, until the LED lights up, then
release. The LED flashes and beeps to indicate the
ITEM #. For example, if the Keyfob you are
checking is defined as ITEM # 5, you would hear 5
beeps.
FIND IT Locator Functions, cont.