English, Right left right left rca pin plug cord, Md player, tv, etc. to analog audio output – JVC 0303MWMMDWJEM User Manual

Page 15: Ac power cord to a wall outlet

Advertising
background image

12

English

Right

Left

Right

Left

RCA pin plug
cord

AUX / MD

AUDIO

RIGHT

LEFT

PCM/
STREAM

DVD OPTICAL

DIGITAL

OUT

MD player, TV, etc.

To analog audio output

To connect analog audio equipment

By using an RCA pin plug cord (not supplied), you can
connect equipment with analog audio output jacks such as
an MD player, a TV, etc.
• Be sure that the plugs of the audio cords and the jacks on

the rear of the unit are color-coded:
White plugs and jacks are for left audio signals, and red
ones for right audio signals.

To listen to or to record the sound from analog audio
equipment connected to the AUX/MD jacks, select “AUX/
MD” as the source to play. (See page 20.)

RIGHT

LEFT

SPEAKER IMPEDANCE
6~16

SPEAKERS

AV

COMPU

LINK

VIDEO OUT

SELECT

PAL

NTSC

ANTENNA

AC power cord

To a wall
outlet

S-VIDEO

VIDEO OUT

VIDEO

AUX / MD

AUDIO

RIGHT

LEFT

PCM/
STREAM

DVD OPTICAL

DIGITAL

OUT

NOW you are ready to plug in the unit and any other
connected equipment.

When you connect the AC power cord into a wall outlet,
the unit automatically starts the display demonstration
(Automatic display demonstration).
• Each time you press and hold COLOR/DEMO (or

COLOR on the remote control) for more than 2 seconds,
the Automatic display demonstration turns on (“DEMO
ON” appears in the main display) and off (“DEMO OFF”
appears in the main display).

To stop and cancel the display demonstration manually,
press COLOR/DEMO (or COLOR on the remote control)
during display demonstration while the unit is in standby
mode.
• Pressing DIMMER (see page 22) or DISPLAY (see page

17) also cancels the display demonstration.

• “0:00” flashes in the main display until you set the

built-in clock. After setting the clock, the clock time will
appear in the main display while the unit is turned off.
To set the built-in clock, see “Setting the Clock” on page
17.

To start the display demonstration manually, press
COLOR/DEMO (or COLOR on the remote control) while
the unit is in standby mode.
• Each time you press the button, the display demonstration

alternates between on and off.

EN08_17UX_A7DVD[UF].pm6

03.2.26, 9:24 PM

12

Advertising