JVC PCX290 - Manual (Page 10)

– 7 –
R L AC IN
R
2
1
Detaching the speaker system from the main unit
With the lever on the back of the unit pushed in the direction
of the arrow (1), lift up the speaker vertically (2) as the
illustration shows.
AC IN
R
2
1
Attaching the speaker system to the main unit
Fit the speaker into the grooves on the main unit (1) and slide
down the speaker vertically (2) as the illustration shows.
For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX IN jacks by using audio cords (not
supplied).
To audio output
Audio/video
equipment
Connecting Other Equipment
You can connect an audio equipment as a playback device.
When you connect and use this equipment, refer also to its
manual.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
EN01-12_PC-X290[B]_f.p65 04.4.5, 11:24 AM 7