JVC XV-S300BK - Manual (Page 20)

18
Basic oper
ation
s
Basic operations
In the following description, the buttons on the remote control unit are mainly used, however, you may use the
corresponding buttons on the front panel of the unit if available.
Turning on/off the unit
Press STANDBY/ON on the remote control unit or press on the front panel.
.
• You can turn on the unit by pressing the
3
button. In this
case, the unit starts playback if the disc is set in the disc tray.
• If no disc is set, “NO DISC” appears on the display window.
• You can turn on the unit by pressing the 0 (OPEN/CLOSE)
button on the front panel.
Inserting and removing discs
1
Press
0 (OPEN/CLOSE) to open the disc tray.
2
Place the disc in the tray.
3 Press 0 (OPEN/CLOSE) to close the disc tray.
• If you press 0 (OPEN/CLOSE) during playback, the unit stops playback and opens the tray.
OPEN/
CLOSE
STANDBY/ON
1 2 3
4 5 6
7 8 9
10 0 +10
STANDBY/ON
OPEN/CLOSE
STANDBY/ON
DVD/SUPER VCD/VCD/CD PLAYER
SKIP PAUSE PLAY STOP STANDBY DOLBY D I G I T A L
NOTE
• Even if you press one of the STANDBY/ON or button to turn off the unit, the unit is not disconnected from the AC power
source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very
small amount of power.
NOTES
• The unit can playback DVD VIDEO, Audio CD, Video CD, SVCD and MP3 CD discs only. Do not load other disc types. For details
about playable disc types, see page 12.
• When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
tray is closed, and the disc may not be removed from the unit.
OP EN /CL OS E
STA ND BY/O N
D VD /SU PE R V CD /VC D/C D P LA YE R
SK IP
PA US E
PLA Y
ST OP
ST AN DB Y DO LB Y D I G I T A L
With the label side up
• To insert an 8-cm disc, place
it in the inner recess.
;96%. % B(QJERRN 3DJH  :HGQHVGD\ -DQXDU\    30