Jensen JE2608 - Manual (Page 31)

31
Application
Customizing the CHANNEL Settings
Select TV source for example. (Press SOURCE button to select TV mode)
1. Press the POWER button to turn the LCD TV on.
2. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT
buttons to select the CHANNEL.
3. Use the UP and DOWN buttons to highlight an individual CHANNEL option, use the LEFT and RIGHT
buttons to change the setting, and press the MENU button to exit.
The CHANNEL menu includes the following options :
Antenna Allows you to select antenna between Air and Cable.
If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO.,
Channel Label and DTV Signal) are unable to use.
Auto Scan Use Down button to highlight the “Auto Scan” item, then press RIGHT button
to enter into the following menu.
Setup Lock
12
6
Timer Picture Sound Channel
Antenna
Auto Scan
Favorite
Show Hide
Channel No
Channel Label
DTV Signal


 


Air
Select Move Exit MENU
50 3 
KOCE LB
Good
Setup Lock
12
6
Timer Picture Sound Channel
Cable System
Start to Scan

 
Auto
Select Move Exit MENU
If you select “Air” as input signal in Antenna item, you can press RIGHT button
to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
Setup Channel
Select Move Exit MENU
Picture Sound
12
6
Timer Lock
RF CH
Found

7
4