JBL CS6100 User Manual
Page 10
10
† The Peak Dynamic Power is measured by recording the highest center-to-peak voltage
measured across the output of a resistive load equal to minimum impedance of the
transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
CS6100
SATELLITES
Frequency Response (– 6dB):
100Hz – 20kHz
Recommended Amplifier Power Range:
10 – 100 Watts
Sensitivity (2.83V @ 1 meter):
88dB
Nominal Impedance:
8 Ohms
Crossover Frequency:
3.0kHz; 12dB/octave
High-Frequency Driver:
1/2" (13mm) Titanium-laminate dome, magnetically shielded
Midrange Driver:
Dual 3-1/2" (89mm), magnetically shielded
Dimensions (H x W x D):
11-3/8" x 5-1/8" x 3-3/8" (289mm x 131mm x 86mm)
Weight:
3.2 lb (1.5kg)
CENTER
Frequency Response (– 6dB):
100Hz – 20kHz
Recommended Amplifier Power Range:
10 – 100 Watts
Sensitivity (2.83V @ 1 meter):
88dB
Nominal Impedance:
8 Ohms
Crossover Frequency:
3.0kHz; 12dB/octave
High-Frequency Driver:
1/2" (13mm) Titanium-laminate dome, magnetically shielded
Midrange Driver:
Dual 3-1/2" (89mm), magnetically shielded
Dimensions (H x W x D):
5-1/4" x 11-3/8" x 3-3/8" (133mm x 289mm x 86mm)
Weight:
3.2 lb (1.5kg)
SUBWOOFER
Frequency Response (– 6dB):
30Hz – 120Hz
Amplifier:
150W RMS/300W Peak
†
Driver:
10" (250mm)
Dimensions (H x W x D, including feet):
18-1/2" x 12-3/4" x 15" (470mm x 324mm x 381mm)
Weight:
41 lb (18.6kg)
SPECIFICATIONS
CS6100-120V om.qxd 12/15/06 4:26 PM Page 12