JVC LET0213-001A - Manual (Page 15)

13
English
Getting started
XV-C3SL / LET0213-001A / English
Getting started
Connections
*In the following description, “TV” may be substituted with “monitor” or “projector.”
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
• Do not connect the AC power cord until all other connections have been made.
• Since different components have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the
audio outputs to your separate audio equipment. (See the following pages.)
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video
cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which
converts stereo audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video
cable (optional) in addition to the (standard) video connection to get better picture quality.
Before making any connections
To connect to a TV
2
AUDIO OUT
VIDEO OUT DIGITAL OUT
PCM STREAM S-VIDEO S-VIDEO
AND VIDEO
VIDEO COMP.
RGB
RGB
Y C
AV COMPU LINK AV
RIGHT LEFT
COAXIAL
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
TV
The unit
Yellow White Red
Audio/Video cable
(supplied)
Yellow
White
Red
S-video cable
(not supplied)
White
;9&6/ % B(QJERRN 3DJH  )ULGD\ $SULO     30