Jacuzzi Duetta DZ05 - Manual (Page 2)

Technical Specifications
DimenSionS
66” L x 42” W x 26” H
(1676 mm) L x (1067 mm) W x (660 mm) H
Drain/overflow
A: 18.4” (467 mm) B: 11” (279 mm)
CuTouT
Template Provided Part Number: DA07000
ToTal weighT
1106 lbs (502 kg) / 57.5 lb/sq. ft. (281 kg/m
2 )
operaTing gallonage
Min. 90 U. S. Gal (341 liters)
Max. 95 U.S. Gal. (360 liters)
proDuCT weighT
117 lbs (53 kg)
SkirT mounTing
Not Available
eleCTriCal SpeCifiCaTionS
requires a dedicated gfCi protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
heaTer (STanDarD)
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N BN60000
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inSTallaTion noTeS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR35000 01/08
Duetta
™
6642
Salon ™ Spa
DZ05
Duetta™ 6642 Salon™ Spa with Chromatherapy
Right Hand
• Center Drain Location
• Accessories / Hardware:
TheraPro™ Jet Rings Kit: #D095
Sch 40, Rotary Drain Kit: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
11.04"
66"
42"
33"
3.84"
13" x 4"
2"
Motor
Heater
12" H x 24"
L
Service Access
Blower
END VIEW
26"
42"
SIDE VIEW
66" 1/2"
(13 mm)
(Motor)
(Inlet Heater)
(Blower)
DRAIN/OVERFLOW
A
B
product Shown: Duetta™ 6642 Salon™ Spa
right hand Shown model: DZ05
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.