Jensen Hello Kitty KT2024A User Manual
Page 9
8
Repeat All
When the REPEAT BUTTON is pressed twice, the REPEAT INDICATOR will light steadily. The
whole disc will be played continuously.
To Cancel the Repeat Function: Press the REPEAT BUTTON until the repeat indicator goes
off.
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the SKIP + or SKIP - BUTTON to go to the next track or go
back to the beginning of the current track.
2. During Play mode or Pause mode, press and hold the SKIP + or SKIP - BUTTON to search
within the current track with audible high speed playback.
PROGRAM PLAY MODE
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1.
Press the PROGRAM BUTTON once. Both Program Number
“01” and the PROGRAM
INDICATOR will flash.
2.
Press the SKIP + or SKIP - BUTTON to select the track to be programmed.
3.
Press the PROGRAM BUTTON again to store the selection. The Program Number will
advance to “02” and flash to prompt for the next input.
4.
You may repeat steps #2 to #3
to program up to 20 tracks. As soon as you have entered
the 20th track, the LED DISPLAY will automatically show the programmed tracks one by
one in their correct sequence starting from the first. At the end of program review, Program
Number
“01” and the PROGRAM INDICATOR will both flash.
5.
Press the PLAY BUTTON to complete and start program play. Press the STOP BUTTON
to stop.
6.
To review/edit the programmed tracks during play, press the STOP BUTTON and then the
PROGRAM BUTTON, the LED DISPLAY will automatically show the programmed tracks
one by one in their correct sequence starting from the first. At the end of program review,
Program Number “01” and the PROGRAM INDICATOR will both flash. If you do not want to
change any track in the program, press PLAY BUTTON.
7.
To edit a programmed track, first press the PROGRAM BUTTON until you reach the
program number whose track you want to change then press the SKIP+ or SKIP-
BUTTON to select a new track and press PROGRAM BUTTON again to confirm.
8.
To cancel program play, press the STOP BUTTON twice while reviewing programmed
tracks or open the CD DOOR in STOP mode.
9.
To turn off the CD player, slide the FUNCTION Switch to “OFF”. The POWER Indicator will
go off.