Jwin JX-CD483 - Manual (Page 11)

Portable CD Radio Cassette Recorder V10M10_IM_EN_11282007
www.jWIN.com - 10 -
OPERATIONAL INSTRUCTIONS
REPEAT MODE
1. Repeat
1:
When the REPEAT button is pressed once, the REPEAT indicator
light will blink continuously. This single track of music will be repeated.
2. Repeat
All:
When the REPEAT button is pressed twice, the REPEAT indicator
light will light. The whole disc will be played continuously.
3.
To cancel the Repeat Function
Press the MODE button repeatedly until the REPEAT Indicator light
disappears.
PROGRAM MODE
1.
During the CD stop mode, press the PROGRAM button once. The
PLAY/PROG indicator light and the number of Program to be
memorized starts from the first program “1” will blink continuously on
the LED SCREEN.
2. Press
the CD SKIP/SEARCH or SKIP/SEARCH button to your desired musical track,
the LCD SCREEN will show the appropriate track number. Press the PROGRAM button
to store this track in memory.
3.
Repeat the above procedure until all desired tracks have been programmed. A total of
20 tracks can be stored in memory.
Note: When the SKIP/SEARCH button is pressed, it will always show the last
programmed track first to recall your memory.
4. Press
the CD PLAY/PAUSE button once to start the program
playback and the CD play (PLAY/PROG) Indicator light will blink
continuously
5.
To check the program you have stored after complete programming,
press the PROGRAM button once during CD stop mode, then press
the CD SKIP/SEARCH button once, The LCD SCREEN will
show the first programmed track number. Repeat above procedure
to read all the programmed memory.
6.
To cancel the programmed memory:
• During the CD stop mode, press the CD STOP button once, or
• Open the CD DOOR during the CD stop mode.
The PLAY/PROG Indicator light will disappear .