Using the bluetooth devices, Using the bluetooth ® devices – JVC KD-APD89 User Manual

Page 164

Advertising
background image

12

Registering using “Open”

Preparation: Operate the device to turn on its
Bluetooth function.

1

Select “BT-PHONE” or “BT-AUDIO.”

2

Select “NEW.”

3

Enter setting menu.

4

Select “Open.”

5

Enter a PIN (Personal Identification Number)

code to the unit.

• You can enter any number you like (1-digit to

16-digit number). [Initial: 0000]

• To enter a PIN code less than 4-digit, firstly

delete the initial PIN code (0000) by pressing
number button 5 (

).

* Some devices have their own PIN code. Enter the

specified PIN code to the unit.

1

Move to the next (or previous) number

position.

Using the Bluetooth ® devices

For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer
jack on the rear of this unit.
• Refer also to the instructions supplied with the

Bluetooth adapter and the Bluetooth device.

• Refer to the list (included in the box) to check

the countries where you may use the Bluetooth ®
function.

To use a Bluetooth device through the unit
(“BT-PHONE” and “BT-AUDIO”) for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
• Once the connection is established, it is registered in

the unit even if you reset your unit. Up to five devices
can be registered in total.

• Only one device can be connected at a time for each

source (“BT-PHONE” and “BT-AUDIO”).

Registering a Bluetooth device

Registration (Pairing) methods

Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select “BT-PHONE” or “BT-AUDIO” as the source to

operate the Bluetooth menu.

Open

Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.

Search

Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.

• When

is shown on the display, you can

move back to the previous screen by pressing number
button 3.

EN08-13_KD-G844[UI]f.indd 12

EN08-13_KD-G844[UI]f.indd 12

12/14/07 11:52:38 AM

12/14/07 11:52:38 AM

Advertising