Jensen JDTV-430 - Manual (Page 6)

User manual of JDTV-430, page 5
TV CONTROLS
Control Function
1. POWER Press to switch unit between On and Standby mode.
2. OK (ENTER) Press to choose a menu item or confirm a setting.
3. MENU/EXIT While in TV mode, press to bring up the main function menu.
Inside a function menu, press to end setting mode. Press again to return to TV
mode.
4. VOL- While watching TV, press to decrease the volume output.
While in main menu, press to select previous function menu, e.g. Audio.
Inside in a function menu, press to change the setting of the selected menu item.
5. VOL+ While watching TV, press to increase the volume output.
While in main menu, press to select next function menu, e.g. Audio.
Inside in a function menu, press to change the setting of the selected menu item.
6. CH- While watching TV, press to recall the previous captured TV channel.
While in main menu, press to select the first menu item for user adjustment.
Inside in a function menu, press to move the selection bar down the list.
7. CH+ While watching TV, press to recall the next captured TV channel.
Inside in a function menu, press to move the selection bar up the list.
8. Antenna Input This jack accepts the external monopole antenna included with your TV set
9. Built-in Antenna Fully extend this telescopic antenna for best indoor or outdoor reception.
Tips: when receiving weak signal in the upper channels, folding back the last
section may help to improve picture stability.
10. TFT Color
Screen This 16:9 screen delivers vivid pictures at 480H x 272V resolution.
11. Speaker Grille Do not block these holes where speaker sound is emitted.
They also serve as ventilation openings while TV is in operation.
12. Foldout Stand Fold out the stand if you want to keep the TV set upright.
13. Battery
Compartment Cover Remove this cover to disconnect the internal Li-ion battery pack for replacement
when necessary.
14. Headphone Jack This jack accepts a pair of stereo earbuds with a standard 3.5mm plug
15. On/Off Switch This is the main power on/off switch. Always switch to “off” if you are not using
the TV set for the next few hours to conserve battery power.
16. Charge Indicator It will light steadily when the AC adaptor is connected and On/Off Switch is set
to “OFF”.
It will flash when On/Off Switch is set to “ON” while battery is being recharged.
It will go off when the AC adaptor is connected and battery has been fully
charged or the TV is operating on battery power.
17. DC Jack This jack accepts the included AC adaptor for normal operation and charging.