Jwin JP-197 - Manual (Page 12)

Digital Photo Frame V10M10_IM_EN_09252007
www.jWIN.com
- 11 -
GETTING STARTED
Location of Controls on the Remote-
continued
24. NEXT Button 26. CARD Button
25. PREV Button 27. USB Button
General Setup
1. Plug one end of the AC adapter into the AC Jack in the JP-
177, JP-187, or JP-197 and the other end to a standard AC
electrical outlet.
2. Insert a memory card into the appropriate slot on the side of
the picture frame.
Note: This unit is compatible with MMC, MS, SD memory cards.
The memory card will fit in only one direction; DO NOT FORCE.
When properly inserted, the card should fit firmly and securely in
the appropriate slot.
3. Power the unit ON.
4. Press any key on the panel or remote control to exit logo
mode to main menu.
Power On / Off
1. Slide the ON/OFF switch on the back of the main unit to the
ON position to power the unit on.
2. Slide the ON/OFF switch on the back of the main unit to the
OFF position to power the unit off.
Headphone Use
For private listening, insert a headphone or earphone plug into
the HEADPHONE Jack.
Note: Listening to loud music can cause permanent damage to
hearing. Set volume to a comfortable listening level.