GE 98505 GE Wireless Mini Presentation Mouse - Manual (Page 4)

4
Reconnecting the Mouse to the Receiver
This mouse will usually automatically connect to the receiver. If needed,
you can connect the mouse to the receiver by following these steps.
1. Press the button on top of the receiver. The LED will light up on
the receiver.
2. Press the button on the bottom of the mouse. It is located where the
receiver is stored.
3. The LED on the receiver will blink and you are fi nished.
Storing the Receiver
To help conserve battery and increase portability you
may store the receiver under the mouse. To do this,
simply unplug the receiver from your USB slot and
place it in the designed position on the bottom of the
mouse. Once the receiver is correctly in place, the power
will automatically shut off.
Using the Laptop Clip
Your mouse is equipped with the Laptop Clip. This is used for easy storage
of the mouse while on the go with your laptop. To use this clip, simply insert
the clip on the bottom of the mouse then place your mouse into the modem
slot on your laptop. Please ensure that your modem slot is not in use before
attaching the storage clip.