JVC KD-AVX44 - Инструкция (Страница 57)

SETTINGS
57
ENGLISH
Menu items Selectable settings, [reference page]
Disc Setup 2
*1
D. (Dynamic) Range Compres.
(Compression) You can enjoy a powerful sound at a low volume level while playing
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to always use this function.
Speaker Size You can adjust the speaker size setting.
• Front SPK: Small, Large
• Center SPK: None, Small, Large
• Rear SPK: None, Small, Large
• Subwoofer: On, Off
• Speaker size: <Large> for 13 cm diameter or more; <Small> for
13 cm or less.
• Front speakers and rear speakers cannot be adjusted separately the
left and right.
Regardless of the setting above...
• No sound comes out of the subwoofer while playing Dolby Pro
Logic II Movie or Music if the front speaker is set to <Large>.
• No sound comes out of the center speaker when surround is
deactivated.
Speaker Level You can adjust the output level of the activated speakers (☞
<Speaker Size> above), monitoring the test tone.
Front Lch/Center Ch/Front Rch/Rear Rch/Subwoofer
*2 /Rear Lch:
Adjust the output level of each speaker in the range of –10dB to
+10dB; Initial 0dB.
• Hold
6 to turn on and off the test tone.
Speaker Distance You can adjust the speaker output timing.
Front Lch/Center Ch/Front Rch/Rear Rch/Rear Lch:
Adjust the speaker distance from the listening position in the range
of 15 cm/6 inches to 600 cm/240 inches in 15 cm/6 inch step; Initial
120 cm/48 inch (for center speaker), 150 cm/60 inch (for other
speakers).
• Hold DISP to change the measuring unit—cm and inch.
* 1 Selectable only for “Disc” and “USB.” (Playback stops when you select one of the items.)
* 2 This subwoofer level setting takes effect only when surround is activated. (☞ also pages 26 and 27)
Select the
speaker
Adjust the
speaker size
Select the
speaker
Adjust the
speaker level
Select the
speaker
Adjust the
speaker
distance
EN_KD-AVX44[EE]1.indb 57 EN_KD-AVX44[EE]1.indb 57 08.1.25 4:04:42 PM 08.1.25 4:04:42 PM