John Lewis U29492 JLBIIH603 - Manual (Page 15)

15
Using the timer
All cooking zones can use each use one of the two timer
functions at the same time.
3
If a cooking zone is switched off, the timer function
set is also switched off.
3
If a heat setting is set on this cooking zone in addi-
tion to a countdown timer, the cooking zone is
switched off after the time set has elapsed.
Selecting a cooking zone
3
The heat setting indicator of the selected cooking
zone goes out, as long as the timer time can be set.
3
If the pilot light is flashing more slowly, the heat set-
ting indicator appears again and the heat setting can
be re-set or modified.
3
If other timer functions are set, after a few seconds
the shortest remaining time of all the timer functions
is displayed and the corresponding pilot light flashes.
Function Condition Outcome after the time has
elapsed
Automatic cut-out a heat setting is set acoustic signal
00 flashes
Cooking zone switches off
Countdown timer cooking zones not in use acoustic signal
00 flashes
Step Control panel Display
1. Touch once Pilot light of the first cooking zone flashes
2. Touch once Pilot light of the second cooking zone flashes
3. Touch once Pilot light of the third cooking zone flashes
4. Touch once Pilot light of the fourth cooking zone flashes