Jwin JD-VD509 - Manual (Page 8)

HOME DVD PLAYER V10M10_IM_EN_08072006
www.jWIN.com 14
GETTING STARTED
About the Audio Outputs
This unit supports the three-way audio connection: 2-channel (stereo) audio connection, 5.1-
channel surround audio connection, and digital coaxial audio connection. If you plan to connect
this unit directly to your 2-channel audio or video device, you only need to connect the audio
cable to the FL (Front Left) and FR (Front Right) audio output jacks on the back of this unit. If
you have a home speaker system supporting the 5.1-channel surround sound or coaxial digital
audio input, you need to use all the 5.1-channel audio jacks or the coaxial digital audio output.
Please note that the 5.1-channel audio cables and the coaxial digital audio cable are not
included in the package.
About the Video Outputs
This unit also supports the three-way video connection: composite VIDEO connection, S-
VIDEO connection, and component VIDEO connection. The component video output gives you
the best video quality among three connections. The S-VIDEO output gives you the better
video quality than the composite video output. The composite video output gives you the good
video quality just enough to watch your movie on the small TV sets. Thus, it is not necessary to
make all the video connections. Just choose and make one of the video connections available
on your TV or display device. Please note that the S-VIDEO and component VIDEO cables are
not included in the package.
Analog Audio Outputs
•
For the 2-channel audio output, two
connectors, FL and FR, are used only.
• For the 5.1-channel audio output, all
connectors are used.
Digital Audio Output
This unit supports the digital audio
output to the external audio
system through the coaxial audio
cable.
Composite Video and S-VIDEO Outputs
•
The composite VIDEO output is just
good enough to watch a movie on the
small TV sets.
• The S-VIDEO (Separate Video) output
gives you better video quality than the
composite video output.
Component Video Output
The component video output (Y /
Pr / Pb) gives you the best video
quality, comparing to the video
quality of the S-VIDEO and the
composite VIDEO outputs.
HOME DVD PLAYER V10M10_IM_EN_08072006
www.jWIN.com 15
GETTING STARTED
Connecting to a TV Set with 2-Channel Audio Input
Notes on the Connection Diagram
1. You don’t need to connect all the video outputs even though your TV set supports all the
connections. Choose and make the most appropriate video connection available on your
TV. The S-VIDEO and the component VIDEO cables aren’t included in the package.
2. The component VIDEO output is labeled as Y, Pr (or Cr), and Pb (or Cb), and these three
component video output jacks must be all and properly connected to properly display the
picture in the component video mode of your TV set.
R
L
AUDIO IN
S-VIDEO
VIDEO
VIDEO IN
Y
Pr
Pb
VIDEO IN
See the notes below for
the video connection.