JVC LPT0991-001A - Manual (Page 36)

Filename [XV48EK_08DVD.fm]
Masterpage:Left+
Page 36 18 November 2004 10:44 pm
OPERATIONS ON DVD DECK (cont.)
36
Programme Playback
You can play back up to 99 tracks in the desired order.
A
Access the on-screen bar.
Press ON SCREEN twice in stop mode.
B
Select the menu item.
Press w e to move H to , then press ENTER.
● The programme table appears under the on-screen bar.
C
Select the tracks in the desired order.
If you have specified a wrong selection
Press rt to move H to the track to be corrected, then press 8.
The track is erased and the next programmed tracks move up.
D
Start playback.
Press 4. Playback starts in the selected order.
● With an Audio CD disc, the programme table remains on the
TV.
● When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
To check the programme contents
During playback, press 8. Playback stops and the
programme table appears on the TV screen.
● You can also check the programme contents through the on-
screen bar during playback.
To clear the programme
Press 8
while playback is stopped and the programme
table appears on the TV screen.
To exit from Programme Playback
After clearing the programme, press ON SCREEN.
Random Playback
You can play back all the tracks on the disc in random order.
A
Access the on-screen bar.
Press ON SCREEN twice in stop mode.
B
Select the menu item.
Press w e to move H to , then press ENTER.
● Playback starts in random order.
To clear the on-screen bar
Press ON SCREEN.
Press the appropriate
number keys to select the
tracks.
Slide to the
right.
Programme time
Examples:
● To select track 5, press the number key “5.”
● To select 25, press the number key “+10,” “+10,” then
“5.”
● To select 40, press number key “+10” three times, then
“10.”
XV48EK_01.book Page 36 Thursday, November 18, 2004 10:45 PM